ASTM A240 TP321 2B Finish Stainless Steel Cold Rolled Coil EN 10025
Type 321 has excellent intergranular corrosion resistance after
exposure to this temperature range, and this grade
resists oxidation up to 1500˚F and has higher creep and stress
rupture properties than 304/304L.
Product introduction :
Product Name | ASTM A240 Stainless Steel Plate / Sheet with Good
Price(304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA |
Thickness | 0.3mm-200mm |
Width | 1000mm-2800mm |
Length | 2000 mm , 2438 mm , 3000 mm , 6000 mm OR as reqirement |
Finish | No.1 , 2B , HL , NO.4 , BA , SB ,1D , 2D , 2C , 2E , NO.5 , NO.9 |
Technical | Hot rolling,Cold rolling |
Standard | ASTM 240 , A480 , JIS G 4304 , EN 10088-2 |
MOQ | 5 ton |
Certification | MTC Type 3.1 , PMI , CO |
Delivery Time | 7 days if have stock |
Product Description
1. ASTM A240 S30408 304 Stainless Steel Plate with Good
Price(304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA
2. thickness: 0.4-200mm
3.width:1000/1219/1500/1800/2000/2500mm
4.Length: 2000/2438/3000/6000mm, or other length as you
requirements.
5.Surface: pickling; mill surface; 2B; HL; No.4; 8K; Mirror
colorful; HL colorful; Etching surface, etc
6.Process: hot rolled, cold rolled,
7. The material grade we have
201,202,1.4371,1.4373,SUS201,SUS202,301,303,304,304L,304LN,304N,309,309S,310,310S,316L,316Ti,317L,321,321H,347H,1.4319,1.4305,1.4301,1.4306,1.4833,1.4845,1.4404,1.4571,1.4438,1.4541,SUS304,SUS304L,SUS309S,SUS310S,SUS316,SUS316Ti,SUS316L,409,409L,410S,420,430,440C,444,1.4016,1.4006,1.4002,1.4125,1.4501,1.4362,1.4460,1.4521,1.4545,1.4542,1.4568,1.4547,F51,F52,F53,F55,F60,630,631,17-4PH,15-5PH,S31254,S31803,S32900,S32205,S32750,S32550,S32760,S32304,S31200,S17400,S17700,904L,254SMo,1.4462,1.4410,1.4501,1.4362,1.4460,1.4545,1.4542,1.4568,1.4547,1.4529,1.4539
and so on.
Chemical composition:
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo | N |
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 9.00-13.00 | 17.00-19.00 | - | - |
Mechanical property:
| Grade | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | HBW | HRB | HV |
| 321 | ≥520 | ≥205 | ≥40 | ≤187 | ≤90 | ≤200 |
Surface finish :
| Surface Finish | Definition | Application |
| 2B | Finished by heat treatment, pickling after cold rolling. Followed
by skin pass line to be more brighter and smooth surface | General application Medical instruments, Tableware |
| BA | Bright heat treament after cold rolling | Kitchen utensil, kitchenware, architectural |
| 8K | A mirror-like reflective surface by polishing with finer abrasives
over 800mesh | Construction, mirrors, plate sets, decoration elevators |
| HL | Finished by continuous linear polishing | Architectural purpose, Escalators, kitchenware, vehicles |
| NO.1 | Finished by hot rolling, annealing and picking, characterized by
white pickled surface | Chemical industry Equipment, industrail tanks |
| NO.4 | Polishing with NO.150 to NO.180 mesh abrasives specified in
JISR6001 | Kitchen utensils, Building Construction, Medical equipment |
Packing:
1: Coils covered with waterproof protective packing materails ;
2: Then loaded in strong metal pallets +angle bar protection +steel
strip ;
3: Well loaded and be transported to the loading port .
Packing :
