UNS NO7718 Cold Rolled Plate Alloy Nickel 2mm Thickness Sheet
Is Inconel 718 a steel alloy?
Inconel 718 is a nickel-chromium-molybdenum alloy designed to
resist a wide range of severely corrosive environments, pitting and
crevice corrosion. This nickel steel alloy also displays
exceptionally high yield, tensile, and creep-rupture properties at
high temperatures.
Product introduction:
Commodity | UNS NO7718 Cold Rolled Plate Alloy Nickel 2mm Thickness Sheet
|
| Grade | Inconel 718 |
| Brand | HAYNES;Nippon |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Thickness | 2mm |
| Width | 1000 mm |
| Length | 2000 mm |
| Surface | 2B BA Mirror |
| Standard | JIS,AISI,ASTM,GB,DIN |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | combining excellent high temperature properties with good ductility
and weldability |
Chemical:
| Element | | Min | | Max |
| Al(Aluminium) | | 0.20% | | 0.80% |
| B(Boron ) | | | | 0.006% |
| C(Carbon) | | | | 0.08% |
| Co(Cobalt) | | | | 1% |
| Cr(Chromium) | | 17% | | 21% |
| Cu(Copper) | | | | 0.30% |
| Mn(Manganese) | | | | 0.35% |
| Mo(Molybdenum) | | 2.80% | | 3.30% |
| Nb(Niobium) | | 4.75% | | 5.50% |
| Ni(Nickel) | | 50% | | 55% |
| P(Phosphorus) | | | | 0.015% |
| S(Sulphur) | | | | 0.015% |
| Si(Silicon) | | | | 0.35% |
| Ti(Titanium) | | 0.65% | | 1.15% |
| Iron | | Balance | | |
| | | | |
Surface Finish:
Inconel 718 may be produced through the following processes:
- Annealing: The metal is exposed to heat and then gradually brought
down to lower temperature. This gives the material its strength and
resistance to stress.
- Precipitation hardening: Also called age hardening or precipitation
heat treatment, this method boosts the alloy’s strength by
introducing impurities before heating.
In annealing – or also called solid solution strengthening – metal
components are dissolved completely so that they will precipitate
properly to give Inconel 718 the strength that it is designed to
have.
In precipitation strengthening, nickel and niobium combine to form
gamma double prime (or Ni3Nb). Extreme heat at above 800°C causes
the nickel phases to precipitate.
From this, Inconel 718 may be processed into custom shapes and
orientations when machined above 540°C.
Brand Cross Reference Table:
| GB NEW BRAND | JIS | ASTM | UNS | KS | BS EN | AS |
| 12Cr17Mn6Ni5N | SUS201 | 201 | S20100 | STS201 | 1.4372 | 201-2 |
| 12Cr18Mn9Ni5N | SUS202 | 202 | S20200 | STS202 | 1.4373 | - |
| 12Cr17Ni7 | SUS301 | 301 | S30100 | STS301 | 1.4319 | 301 |
| 06Cr19Ni10 | SUS304 | 304 | S30400 | STS304 | 1.4301 | 304 |
| 022Cr19Ni10 | SUS304L | 304L | S30403 | STS304L | 1.4306 | 304L |
| 06Cr19Ni10N | SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | 304N1 |
| 06Cr19Ni9NbN | SUS304N2 | XM21 | S30452 | STS304N2 | - | 304N2 |
| 022Cr19Ni10N | SUS304LN | 304LN | S30453 | STS304LN | - | 304LN |
| 10Cr18Ni12 | SUS305 | 305 | S30500 | STS305 | 1.4303 | 305 |
| 06Cr23Ni13 | SUS309S | 309S | S30908 | STS309S | 1.4833 | 309S |
| 06Cr25Ni20 | SUS310S | 310S | S31008 | STS310S | 1.4845 | 310S |
| 06Cr17Ni12Mo2 | SUS316 | 3016 | S31600 | STS316 | 1.4401 | 316 |
| 06Cr17Ni12Mo2Ti | SUS316Ti | 316Ti | S31635 | - | 1.4571 | 316Ti |
| 022Cr17Ni12Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | 316L |
| 06Cr17Ni12Mo2N | SUS316N | 316N | S31651 | STS316N | - | 316N |
| 022Cr17Ni13Mo2N | SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | 316LN |
| 06Cr18Ni12Mo2Cu2 | SUS316J1 | - | - | STS316J1 | - | 316J1 |
| 022Cr18Ni14Mo2Cu2 | SUS316J1L | - | - | STS316J1L | - | - |
| 06Cr19Ni13Mo3 | SUS317 | 317 | S31700 | STS317 | - | 317 |
| 022Cr19Ni13Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4438 | 317L |
| 06Cr18Ni11Tji | SUS321 | 321 | S32100 | STS321 | 1.4541 | 321 |
| 06Cr18Ni11Nb | SUS347 | 347 | S34700 | STS347 | 1.455 | 347 |
| 12Cr13 | SUS410 | 410 | S41000 | STS410 | 1.4006 | 410 |
| 20Cr13 | SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 420 |
| 10Cr17 | SUS430 | 430 | S43000 | STS430 | 1.4016 | 430 |
Product Display:
Packing:
UNS NO7718 Cold Rolled Plate Alloy Nickel 2mm Thickness Sheet Packing 2 types:
l Standard packing
l Fine packing
What is Inconel 718 used for?
INCONEL alloy 718 is ideal for use in these circumstances. For
example, it has been used in jet engine and high-speed airframe
parts, including wheels, fasteners, instrumentation parts, bolts,
spacers and buckets.
Factory and Machine Equipment:
We had our own factory to do slitting re-rolling and finish
treatment machine,PVC and interleaving paper we will using with our
machine for you,could protect stainless steel surface from damage
or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
WHY CHOOSE US:
Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will
show you the photos of products and package before you pay the
balance.
Q2: what is the terms of delivery?
A: FOB, CIF, CFR,
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or
belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within
7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after
receiving the deposit.
Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique
drawings, we could build the mold and fixtures.
Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is
available in stocks, however, the the transportation fee is borne
by buyer.
